Tri Axle 60 Ton Dropside Trailer for Sale In Djibouti
Djibouti customer ordered 2 units tri axle 60 ton dropside trailer. The customer saw a side wall semi trailer with the TITAN logo locally. Find us by searching. And leave an inquiry on the website. The sales manager Sunny immediately contacted the customer to inquire about the needs. Customers mainly transport some bulk cargo and bulk cargo, Sunny recommends using a 60 ton dropside trailer according to customer needs.
At present, the tri axle 60 ton dropside trailer has been completed and will be sent to Djibouti. TITAN will take pictures for customers at any time during and after the production process to inform customers of the production progress.
The customer has some concerns about the tri axle 60 ton dropside trailer being damaged in transit. We fully understand our customers' concerns. Of course, all our tri axle 60 ton dropside trailers are covered with a rain cloth to protect against sea and rain erosion. We will always be in touch with our customers and help them with any issues. Hope customers can receive tri axle 60 ton dropside trailer smoothly.
The wheel hub bearing of Semi trailer needs regular maintenance. If it is not maintained, it will easily cause problems, cause wear to the bearing, and easily cause accidents during the driving process. Therefore, it is very important to maintain the wheel hub bearing, and the selection of lubricating grease is particularly important. Today I will share with you the maintenance tips for tri axle 60 ton dropside trailer wheel bearings.
Tri Axle 60 Ton Dropside Trailer for Sale In Djibouti
1. When checking the wheel bearing progress of the tri axle 60 ton dropside trailer, first erect the axle at the end of the wheel hub that needs to be inspected, and use tools such as a bench, a car cover and other tools to securely erect the tri axle 60 ton dropside trailer.
2. Rotate the inspected wheel several times by hand to see if the rotation is smooth and if there is any abnormal noise. If the rotation is not smooth and there is friction noise, it means that the braking part is abnormal; if there is no noise, the rotation is not smooth and is tight and loose, which means that the bearing part is abnormal.
When the above abnormal phenomenon occurs, the wheel hub should be disassembled and inspected. If the wheel hub bearing is normal, there should be no loose and blocked feeling; if the wheel hub bearing swings with a clear feeling of looseness, the lower hub should be disassembled and checked.
3. Check whether the brake of the side wall semi trailer hub is normal. When checking the hub bearing, you can check whether the lower brake is used normally. If there are oil stains on the inside of the tire during the inspection, it is likely that there is a problem with the brake oil pipe or the wheel pump, and there is an oil leakage problem. At this time, it is necessary to carefully identify the cause and eliminate the problem.
Tri Axle 60 Ton Dropside Trailer for Sale In Djibouti
1. Remove the decorative cover and dust cover of the wheel hub bearing the head of the drop side trailer;
2. When removing the tire nut and tire, be careful not to damage the thread of the bolt, otherwise, it will affect the stability of the tire. If the vehicle is using disc brakes, remove the brakes first and then use the caliper to remove the locking ring or locking pin.
3. Then use a tool to remove the hub.
4. After removing the hub, you need to clean the bearing, journal and hub cavity first, clean up the old grease, then use a cleaning agent or diesel oil to clean the bearing, etc., and finally wipe it with a cloth.
5. It is necessary to carefully check the disassembled hub bearing and bearing seat ring to confirm whether there are any problems, such as whether there are cracks, falling off, loose rollers, etc. If there is any problem, the corresponding accessories need to be replaced.
6. When maintaining the wheel hub bearing of the 60 ton dropside trailer, it is necessary to check the fit between the inner diameter of the bearing and the journal to see if there is any problem with the fit. If the fit clearance is greater than 0.1mm, it means that there is a problem, and it needs to be immediately Replaced bearings.
7. After cleaning all the parts, check that there is no problem, apply the Jinguan bearing grease to the inner bearing, and then put it into the hub.
Tri Axle 60 Ton Dropside Trailer for Sale In Djibouti
8. When applying grease to the inner cavity of the bearing, it is necessary to pay attention to squeezing the grease into the bearing until it emerges from the other side. In order to prevent rust in the inner cavity of the tri axle 60 ton dropside trailer and in the axle head cover, grease can be applied to prevent rust, but it should be noted that do not apply too much, otherwise, it will affect the heat dissipation and braking.
9. Install the parts of the hub bearing on the journal in turn, and then use the shaft wrench to tighten the nut. Test whether the hub bearing is installed normally, and turn the hub left and right by hand several times, which can also make the bearing and seat ring fit better.
10. Finally, install the locking piece, fixing nut, tire, dust cover, decorative cover and other parts in sequence.
11. After the final adjustment of the wheel hub of the Tri axle 60 ton dropside trailer for sale, after driving for about 10km, you need to stop and check, and touch the temperature of the wheel hub with your hand to see if it is hot. If it is hot, there is a high probability that the bearing is too tight.
Tri Axle 60 Ton Dropside Trailer for Sale In Djibouti
